Name | N-Hexadecyltrimethylammonium Chloride |
Synonyms | 1631 HTAC CTAC 1631(Cl) barquatct29 Cetrimonium Chloride Cetyl trimethyl ammonium Chloride CETYL TRIMITHYL AMMONIUM CHLORIDE C16-alkyltrimethylammonium chloride Hexadecyl Trimethyl Ammonium Chloride N-Hexadecyltrimethylammonium Chloride N-Hexadecy trimethyl ammonium Chloride N-Hexadecyl trimethyl ammonium Chloride (1-Hexadecyl)trimethylammonium chloride Cetyltrimethylammonium Chloride(CTMAC, CTAC) N-ethyl-N,N-dimethylhexadecan-1-aminium chloride |
CAS | 112-02-7 |
EINECS | 203-928-6 |
InChI | InChI:1S/C19H42N.ClH/c1-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20(2,3)4;/h5-19H2,1-4H3;1H/q+1;/p-1 |
InChIKey | WOWHHFRSBJGXCM-UHFFFAOYSA-M |
Molecular Formula | C19H42ClN |
Molar Mass | 320 |
Density | 0.968g/mLat 25°C |
Melting Point | 232-234°C |
Boling Point | 475.54°C (rough estimate) |
Water Solubility | Soluble |
Vapor Presure | 0.006Pa at 25℃ |
Appearance | White powder |
Specific Gravity | 0.968 |
Color | White |
BRN | 3657974 |
PH | pH(50g/l, 25℃) : 6.0~8.5 |
Storage Condition | Store below +30°C. |
Sensitive | Easily absorbing moisture |
Refractive Index | n20/D 1.3778 |
MDL | MFCD00011773 |
Physical and Chemical Properties | This product is a white or yellowish paste or solid. The relative density was 0.968. Heat-resistant, light-resistant, resistant to strong acids and strong bases. It has excellent stability and biodegradability. It has good compatibility with cationic, nonionic and zwitterionic surfactants. Refractive index nD201.377 8. |
Use | Used for shampoo, hair care products, architectural coatings, fabric softener, etc.; This product is used for emulsified silicone oil, conditioner emulsifier, fiber softener and antistatic agent. Can be used for softening and Isolation paper. As a corrosion inhibitor in the pickling industry. The oil industry is used to prevent internal corrosion of pipelines and acid water treatment systems.; Used as a surfactant |
Risk Codes | R38 - Irritating to the skin R41 - Risk of serious damage to eyes R50 - Very Toxic to aquatic organisms R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R37/38 - Irritating to respiratory system and skin. R22 - Harmful if swallowed R43 - May cause sensitization by skin contact R36/37/38 - Irritating to eyes, respiratory system and skin. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S39 - Wear eye / face protection. S60 - This material and its container must be disposed of as hazardous waste. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S37/39 - Wear suitable gloves and eye/face protection S36 - Wear suitable protective clothing. |
UN IDs | UN 3082 9/PG 3 |
WGK Germany | 3 |
RTECS | ML9145000 |
FLUKA BRAND F CODES | 3 |
TSCA | Yes |
HS Code | 29239000 |
Hazard Class | 8 |
Packing Group | III |
Toxicity | LD50 skin in rabbit: 4300uL/kg/24H |
Reference Show more | 1. Shen Xin, Wang Shibin, Zhang Yongchun, et al. Effect of carbon chain length of cationic surfactant on retarding performance [J]. Oilfield Chemistry, 2018, v.35;No.138(04):77-81 98. |
A colorless or yellowish liquid, paste, or solid. Soluble in hot water and alcohols, 1% of the aqueous solution pH value of 6~8. Decasix alkyl trimethyl ammonium chloride is a cationic surfactant, which can be heat resistant, light resistant, light resistant, resistant to strong acids and strong bases, and has good surface activity, stability and biodegradability.
Under the catalysis of CuO/Cr2 03 system catalyst with silica gel as carrier, decasix alkyl dimethyl tertiary amine was synthesized from decasix alcohol and dimethylamine at a certain temperature and pressure. Decasix alkyl trimethyl ammonium chloride was prepared by using sodium hydroxide as catalyst and methyl chloride.
in petroleum, paper, food processing, textile and other industrial water treatment as a fungicide. Can be used for natural and synthetic fibers, plastics, paper and other industries of antistatic agents, leather softener, fiber softener, pigment finishing agent, asphalt and high temperature oil-in-water emulsion slurry emulsifier. Latex industry as anti-adhesion agents, organic synthesis of catalysts, metals and alloys of corrosion inhibitors. It can also be used as dispersant, coagulant aid, duckweed insecticide, etc. Good compatibility with cationic, nonionic and amphoteric surfactants.
It is irritating and corrosive to eyes. Rat oral LD50 250 mg/kg,300 mg/kg. Care was taken not to mix with the anionic surfactant.
LogP | 3.08 at 25℃ | |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) | |
introduction | xitroammonium chloride, also known as decyltrimethyl ammonium chloride, is a white crystalline powder, easily soluble in isopropyl alcohol, soluble in water, produces a large amount of foam when shaking, and has good compatibility with cationic, nonionic and amphoteric surfactants; Good chemical stability, heat resistance, light resistance, pressure resistance, strong acid and alkali resistance; it has excellent permeability, softening, emulsification, antistatic, biodegradability and sterilization properties. | |
application | cictrexonium chloride can be widely used in pharmaceutical industry additives, protein flocculation, water treatment flocculation, disinfectant, washing, disinfection and sterilization, etc. | |
detection method | CN201210563535.0 discloses a detection method for sterilized residual cichloride in the production process of sodium hyaluronate. the steps are to prepare cichloride standard solution for linear regression equation; Prepare sample solution, use modified potassium bismuth iodide to color, and measure its absorbance value; The content of cichloride is calculated by linear regression equation. The method of making the linear regression equation is as follows: the prepared standard solution of 2 μg/ml, 4 μg/ml, 8 μg/ml, 10 μg/ml and 20 μg/ml, and the absorbance at 290nm was measured after color development with improved bismuth potassium iodide test solution. Using the method of the present invention to detect the content of cichlorium, can make up for the current cichlorium as a disinfectant or reaction reagent can not monitor its content and residual amount of the shortcomings, and the method of the present invention to detect the cichlorium content, greatly shorten the detection time, reduce the detection cost, especially suitable for laboratory detection of cichlorium content. | |
use | this product is used for emulsifying silicone oil, emulsifier for hair conditioner, fiber softener and antistatic agent. Can be used to soften and isolate paper. As a corrosion inhibitor in the pickling industry. The petroleum industry is used to prevent internal corrosion of pipelines and acid treatment systems. Cationic surfactants, widely used in asphalt emulsification and waterproof coating emulsification, glass fiber softening processing, industrial additives and silicone oil emulsifiers, pharmaceutical industry additives, hair conditioner cosmetics emulsification conditioning, leather weaving chemical additives, Emulsion foaming agent, fiber soft antistatic, polyester silk additives, organic bentonite covering agent, protein flocculation and water treatment flocculation, silkworm chamber silkworm disinfectant, washing, disinfection and sterilization, etc. used for shampoo, hair care products, architectural coatings, fabric softeners, etc. This product is used for emulsifying silicone oil, emulsifier for hair conditioner, fiber softener and antistatic agent. Can be used to soften and isolate paper. Used as a corrosion inhibitor in the pickling industry. The petroleum industry is used to prevent internal corrosion of pipelines and acid treatment systems.; Used as surfactant Anionic surfactant Cationic quaternary ammonium salt Used as surfactant | |
production method | 250 kg of decane dimethylamine is put into the reactor. Add 250L petroleum ether to dissolve. 47 kg of methyl chloride was introduced. Stir and raise the temperature under sealed conditions, and azeotrope at 80 ℃ for 1 h. Cooling, cooling, depressurization, adding ethanol and ethyl ester mixed solvent at normal pressure for recrystallization to obtain the finished product. | |
toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |